EnviroTex Lite

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use. The original 1:1 epoxy coating system since 1969 Convenient 1:1 mix ratio by volume 20-30 minute working time / 8-12 hour tack-free time Full cure in 72 hours FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.  Self-levels to approximately 1/16" Produces a durable high-gloss surface coating for artwork, table

EnviroTex Lite

DIY Projects made with EnviroTex Lite

TUTORIAL How to Use Envirotex Lite or ICE Resin on Polymer

EnviroTex Lite Pour-On High Gloss Finish 16oz

Epoxy Resin Envirotex Lite - Pour On High Gloss -1.89 Litres(1/2 Gal) Food Safe

EnviroTex Lite® Pour-On High Gloss Finish

Driftwood Tray with Envirotex Lite Pour On-2-6 - Resin Crafts Blog

® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8

EnviroTex Lite

EnviroTex Lite

Using EnviroTex Lite Resin For Jewelry Making - HubPages

Epoxy resin Envirotex lite. Wobbler test

EnviroTex Lite is a water clear reactive polymer compound. It cures to a thick, glossy coating in about 8 hours at 70°F, and reaches full strength

Envirotex Lite Kit